NORWELD + FOUR WHEEL CAMPERS

U.S. Spec Norweld Trays are designed specifically to match the footprint dimensions and cab-over height of a Four Wheel Campers Flatbed model, and their sturdy, modular design have been recognized as the ideal platform for these campers by FWC dealers across the U.S. and Canada. FWC Flatbed Campers come in 6ft Mid-Size, and 6.5ft and 8ft Full-Size dimensions, and certain Norweld Tray models more most suited for a flatbed build, given the range of height requirements to ensure optimal camper fit. 

 

Norweld 6ft Mid-Size Basic Tray + Four Wheel Campers Fleet Flatbed

Norweld 6ft Basic Tray with FWC Fleet Flatbed

The Norweld 6ft Mid-Size Basic Tray is the optimal platform for the popular FWC Fleet Flatbed Model. This model allows for use of the rear tow hitch for hauling trailers, bike racks, etc. All Norweld Trays mount at 6 points on the truck frame--three mounts on each side. Mid-size truck camper platforms require the Norweld Tray to be positioned with a set of low mid-size mounts due to the more car-like seating position and shorter cab height of the Toyota Tacoma, Chevy Colorado, etc. When positioned with low mounts, the camper will achieve an optimal "cab-over gap" above the truck cab. The "cab-over gap" is the small gap between the tallest point of the truck cab and the bottom of of the camper's front overhang or cab-over. Some gap is required to allow room for truck bed and camper flex when articulating the truck's suspension during off-road driving, however too much gap can negatively affect aerodynamics and gas mileage. Due to the low mounting position of the Tray, optional items such as the 43L under-tray water tank and rear pull-out drawer in the Mid-Size Deluxe Tray are not feasible. The Norweld 6ft Mid-Size Basic Tray does, however, include two front storage boxes, one behind-the-wheel storage box, and one behind-the-wheel 43L Water Tank located on the driver's side. This rear tank can be used as a gray water storage tank for the camper's sink and inside-shower water though an internal manifold, allowing for a "fully-enclosed" gray and black water camper for compliance in regulated parks and recreation areas.

 

Norweld 6.5ft Full-Size Deluxe Tray + Four Wheel Campers Hawk Flatbed

Norweld 6.5ft Tray - FWC Hawk Flatbed

The Norweld 6.5ft Full-Size Deluxe Tray is the optimal platform for the FWC Hawk Flatbed Model, especially when towing, rear-hitch use, or an optimal rear departure angle is required for off-road travel. All Norweld Trays mount at 6 points on the truck frame--three mounts on each side. Full-Size truck camper platforms allow the Norweld Tray to be positioned with a set of regular full-size mounts due to the larger frame, upright seating position, and cab height of the Ford Super Duty, Dodge Ram, Chevy/ GMC, Nissan Titan, etc. When positioned with regular mounts, which are adjustable for each specific make and model, the camper will achieve an optimal "cab-over gap" above the truck cab. The "cab-over gap" is the small gap between the tallest point of the truck cab and the bottom of of the camper's front overhang or cab-over. Some gap is required to allow room for truck bed and camper flex when articulating the truck's suspension during off-road driving, however too much gap can negatively affect aerodynamics and gas mileage. Thanks to the longer, wider size of the Full-Size frame, items such as the 43L under-tray water tank and rear pull-out drawer are standard in the Full-Size Tray. The Norweld 6.5ft Full-Size Deluxe Tray includes a forward mounted under-tray water tank with spigot, a 4ft rear pull-out drawer, two front storage boxes, one behind-the-wheel storage box, and one behind-the-wheel 43L Water Tank located on the driver's side. This rear tank can be used as a gray water storage tank for the camper's sink and inside-shower water though an internal manifold, allowing for a "fully-enclosed" gray and black water camper for compliance in regulated parks and recreation areas. 

 

Norweld 8ft Full-Size Deluxe Tray + Four Wheel Campers Hawk Flatbed

Norweld 8ft Deluxe Tray - FWC Hawk Flatbed
The Norweld 8ft Full-Size Deluxe Tray is an alternative platform for the FWC Hawk Flatbed Model, specifically for customers looking to maximize camper storage space while retaining a 6.5ft bed wheel-base, or customers with an 8ft bed who desire more storage space for Spare Tire Carriers, Tunnel Boxes, and under-tray auxiliary fuel cells, often using Super Duty or Diesel truck platforms with robust hauling capabilities. All Norweld Trays mount at 6 points on the truck frame--three mounts on each side. Full-Size truck camper platforms allow the Norweld Tray to be positioned with a set of regular full-size mounts due to the larger frame, upright seating position, and cab height of the Ford Super Duty, Dodge Ram, Chevy/ GMC, Nissan Titan, etc. When positioned with regular mounts, which are adjustable for each specific make and model, the camper will achieve an optimal "cab-over gap" above the truck cab. The "cab-over gap" is the small gap between the tallest point of the truck cab and the bottom of of the camper's front overhang or cab-over. Some gap is required to allow room for truck bed and camper flex when articulating the truck's suspension during off-road driving, however too much gap can negatively affect aerodynamics and gas mileage. Thanks to the longer, wider size of the Full-Size frame, items such as the 43L under-tray water tank and rear pull-out drawer are standard in the Full-Size Tray. The Norweld 8ft Full-Size Deluxe Tray includes a forward mounted under-tray water tank with spigot, a 4ft rear pull-out drawer, two front storage boxes, one behind-the-wheel storage box, and one behind-the-wheel 43L Water Tank located on the driver's side. This rear tank can be used as a gray water storage tank for the camper's sink and inside-shower water though an internal manifold, allowing for a "fully-enclosed" gray and black water camper for compliance in regulated parks and recreation areas.

 

Norweld 8ft Full-Size Deluxe Tray + Four Wheel Campers Grandby Flatbed

FWC Grandby Flatbed
The Norweld 8ft Full-Size Deluxe Tray is the optimal platform for the FWC Grandby Flatbed Model, especially when towing, rear-hitch use, or an optimal rear departure angle is required for off-road travel. All Norweld Trays mount at 6 points on the truck frame--three mounts on each side. Full-Size truck camper platforms allow the Norweld Tray to be positioned with a set of regular full-size mounts due to the larger frame, upright seating position, and cab height of the Ford Super Duty, Dodge Ram, Chevy/ GMC, Nissan Titan, etc. When positioned with regular mounts, which are adjustable for each specific make and model, the camper will achieve an optimal "cab-over gap" above the truck cab. The "cab-over gap" is the small gap between the tallest point of the truck cab and the bottom of of the camper's front overhang or cab-over. Some gap is required to allow room for truck bed and camper flex when articulating the truck's suspension during off-road driving, however too much gap can negatively affect aerodynamics and gas mileage. Thanks to the longer, wider size of the Full-Size frame, items such as the 43L under-tray water tank and rear pull-out drawer are standard in the Full-Size Tray. The Norweld 8ft Full-Size Deluxe Tray includes a forward mounted under-tray water tank with spigot, a 4ft rear pull-out drawer, two front storage boxes, one behind-the-wheel storage box, and one behind-the-wheel 43L Water Tank located on the driver's side. This rear tank can be used as a gray water storage tank for the camper's sink and inside-shower water though an internal manifold, allowing for a "fully-enclosed" gray and black water camper for compliance in regulated parks and recreation areas.